Transporter T6 Symphony

Transporter T6 Symphony

Ex Tax: £3,333.33

Price: £3,999.99

Availability: In Stock

Available Options


* Need It Fitting?:

 

Here at Plush Automotive through years of experience we have chosen to put 3 levels of Audio Packages together tailored at different levels for each specific vehicle platform. We have made these systems as user friendly to install a physically possible with the use of specific  3d printed/ laser cut speaker mounts giving the best sound possible.

Symphony Level Package Includes:

2 X MILLE LEGEND ML 280.3

2 X MILLE LEGEND ML 700.3

1 X PRIMA FORZA AP F8.9 BIT

1 X PRIMA AP1 D

1 X PRIMA APS 10 D

1 X CONNECTIONS WIRING KIT

2 X PLUSH AUTOMOTIVE BESPOKE BUILT DOOR ADAPTORS

2 X PLUSH AUTOMOTIVE BESPOKE A-PILLAR BUILDS

1 X PLUSH AUTOMOTIVE UNDER SEAT SUB-BOX

1 X SKINZ SOUNDPROOFING

1 X SKINZ WAVE DIFFUSER

 

Technical Specification (MILLE LEGEND ML 280.3):

Tweeter diaphragm mm (in.) 35 (1.38)

Voice Coil Ø mm (in.) 28 (1.1)

Power Handling W peak 180

(Hi-Pass filtered @ 1.8kHz - 12dB Oct.)

Impedance 4 Ohms

Frequency Response Hz 1k - 28k

Magnet size mm 27.8 x 3.5 x 3

D x d x h (in.) (1.1 x 0.14 x 0.12)

Weight of one speaker kg (lb) 0.10 (0.22)

Magnet Neodymium

Dome/Cone Tetolon

 

Technical Specification (MILLE LEGEND ML 700.3):

Midrange size mm (in.) 70 (3)

Voice Coil Ø mm (in.) 20 (0.8)

Power Handling W peak 100

(Hi-Pass filtered @ 250Hz - 12dB Oct.)

Impedance: 4 Ohms

Frequency Response Hz 200 - 20k

Magnet size mm 45 x 25 x 3.5

D x d x h (in.) (1.77 x 0.98 x 0.13)

Centre to centre distance mm (in.) 80 (3.15)

Hole diameter/ mm (in.) 3.7 (0.14)

Eyelet dimensions mm (in.) -

Weight of one speaker kg (lb) 0.21 (0.46)

Magnet Neodymium

Dome/Cone Pressed-pulp cone with cotton fibres.

 

Technical Specification (PRIMA FORZA AP F8.9 BIT):

Distortion - THD (1kHz @ 4Ohms, 90% Power): 0.05 %

Bandwidth (-3 dB, 2 V RMS, 4Ohms): 10Hz - 22KHz

S/N ratio @ A weighted, 1V, Max Power: 95 dBA

Damping factor @ 1 kHz, 2 V RMS, 4Ohms): >70

Input sensitivity: 2 - 15 V RMS

Input impedance: 15KOhms

LOAD IMPEDANCE (MIN):

• 8 Ch: 2Ohms

• 4 Ch - Bridge (1-2) (3-4) (5-6) (7-8): 4Ohms

OUTPUT POWER (RMS) @ 12.0 - 14.4 VDC, 1% THD:

• 8 Ch @ 4Ohms: 35 W x 8

• 8 Ch @ 2Ohms: 65 W x 8

• 4 Ch - (Bridge 1/2; 3/4; 5/6; 7/8) @ 4Ohms: 130 W x 4

OUTPUT POWER (RMS) @ 14.4 VDC, 10% THD:

• 8 Ch @ 4Ohms: 45 W x 8

• 8 Ch @ 2Ohms: 85 W x 8

• 4 Ch - (Bridge 1/2; 3/4; 5/6; 7/8) @ 4Ohms: 170 W x 4

 

DIGITAL SIGNAL PROCESSOR

(32 bit Cirrus Logic; Clock speed: 147 MHz)

Crossover: Full / Hi Pass / Lo Pass / Band Pass

Crossover type and slope:

Linkwitz @ 12/24 dB - Butterworth @ 6/12/18/24 dB

Crossover Frequency: 68 steps @ 20Hz - 20KHz

Phase inversion: 0° / 180°

Analog Input Equalizer: Automatic De-Equalization

Output Equalizer

N.9 Parametric Equalizers: ±12 dB;10 pole; 20Hz - 20KHz

Time Alignment Distance 0 - 510 cm / 0 - 200.8 in.

Time Alignment Delay 0 - 15 ms

Time Alignment Step 0.08 ms; 2.8 cm / 1.1 in.

Time Alignment Fine Set 0.02 ms; 0.7 cm / 0.27 in.

SYSTEM SET:

Preset (Drive Preset) Rotary switch for 7 installation Presets

Acoustic Preset N.2 DSP Memory, DRC selectable

 

Technical Specification (PRIMA AP1 D):

1 X 310 W RMS @ 4 Ohm 

1 X 540 W RMS @ 2 Ohm

Write a review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: